dmesg - 2012-04-11 19:09
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-17-generic (buildd@yellow) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 20:45:39 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
BIOS-e820: 00000000dfee0000 - 00000000dfee2000 (ACPI NVS)
BIOS-e820: 00000000dfee2000 - 00000000dfef0000 (ACPI data)
BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. EP45-UD3R/EP45-UD3R, BIOS F12 01/25/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask FE0000000 write-back
4 base 0DFF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 512MB, type WB
reg 4, base: 3583MB, range: 1MB, type UC
total RAM covered: 8191M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3583MB, range: 1MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f5670] f5670
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000dfee0000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfee0000 page 4k
kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000220000000
0100000000 - 0220000000 page 2M
kernel direct mapping tables up to 220000000 @ dfed6000-dfee0000
RAMDISK: 364a8000 - 3724c000
ACPI: RSDP 00000000000f7070 00014 (v00 GBT )
ACPI: RSDT 00000000dfee2040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000dfee2180 04C5A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfee0000 00040
ACPI: HPET 00000000dfee6f40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000dfee6fc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000dfee7000 004D0 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000dfee74d0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
ACPI: APIC 00000000dfee6e40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000220000000
Initmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [000000021fffb000 - 000000021fffffff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021e7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00220000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000dfee0
0: 0x00100000 -> 0x00220000
On node 0 totalpages: 2096751
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 898840 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee2000
PM: Registered nosave memory: 00000000dfee2000 - 00000000dfef0000
PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
PM: Registered nosave memory: 00000000dff00000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at dff00000 (gap: dff00000:14100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s79616 r8192 d22784 u524288
pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066282
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8174176k/8912896k available (6140k kernel code, 525892k absent, 212828k reserved, 6894k data, 988k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2397.121 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4794.24 BogoMIPS (lpj=9588484)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 25750 entries in 101 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
#2
smpboot cpu 2: start_ip = 9a000
#3 Ok.
smpboot cpu 3: start_ip = 9a000
Brought up 4 CPUs
Total of 4 processors activated (19175.34 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at dfee0000 (8192 bytes)
print_constraints: dummy:
Time: 18:21:46 Date: 04/11/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x5A, should be 0x59 (20110413/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
pci 0000:03:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xdff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0290-0x029f]
pnp 00:01: [io 0x0800-0x087f]
pnp 00:01: [io 0x0290-0x0294]
pnp 00:01: [io 0x0880-0x088f]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f0-0x03f5]
pnp 00:07: [io 0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0b: [io 0x0400-0x04cf]
pnp 00:0b: [io 0x04d2-0x04ff]
system 00:0b: [io 0x0400-0x04cf] has been reserved
system 00:0b: [io 0x04d2-0x04ff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x000cdc00-0x000cffff]
pnp 00:0d: [mem 0x000f0000-0x000f7fff]
pnp 00:0d: [mem 0x000f8000-0x000fbfff]
pnp 00:0d: [mem 0x000fc000-0x000fffff]
pnp 00:0d: [mem 0xdfee0000-0xdfefffff]
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0xdfedffff]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
pnp 00:0d: [mem 0xfff00000-0xffffffff]
pnp 00:0d: [mem 0x000e0000-0x000effff]
system 00:0d: [mem 0x000cdc00-0x000cffff] has been reserved
system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: [mem 0xffb80000-0xffbfffff]
pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbed6000 - ffff8800dfed6000
software IO TLB at phys 0xdbed6000 - 0xdfed6000
audit: initializing netlink socket (disabled)
type=2000 audit(1334168506.436:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 15965
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
ERST: Table is not found!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 13968k freed
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.1: setting latency timer to 64
pata_acpi 0000:03:00.1: PCI INT B disabled
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:545:392
rtc_cmos 00:04: setting system clock to 2012-04-11 18:21:47 UTC (1334168507)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-3: new high speed USB device number 2 using ehci_hcd
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
usb 4-1: new low speed USB device number 2 using uhci_hcd
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 988k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 2032k freed
Freeing unused kernel memory: 1388k freed
udevd[97]: starting version 173
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:03:00.1: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 44 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000c7a000, 00:1f:d0:9b:2a:88, XID 1c4000c0 IRQ 44
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 19
ata8: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 19
Floppy drive(s): fd0 is 1.44M
usbcore: registered new interface driver uas
FDC 0 is a post-1991 82077
input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:060B:6220.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB KEYBOARD] on usb-0000:00:1a.1-1/input0
input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input3
generic-usb 0003:060B:6220.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB KEYBOARD] on usb-0000:00:1a.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: HPA detected: current 976771055, native 976773168
ata8.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
ata8.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
ata7.00: HPA detected: current 976771055, native 976773168
ata7.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
ata7.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 6:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 >
sd 7:0:0:0: [sdb] Attached SCSI disk
Initializing USB Mass Storage driver...
scsi8 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
EXT4-fs (sdb1): write access will be enabled during recovery
scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:3: Attached scsi generic sg6 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:2: [sde] Attached SCSI removable disk
sd 8:0:0:3: [sdf] Attached SCSI removable disk
EXT4-fs (sdb1): orphan cleanup on readonly fs
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182651
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182344
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182315
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1183340
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 144750
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 131428
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 144708
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 262666
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 262661
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182109
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1183294
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182678
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182664
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182674
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182598
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182700
EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 1182688
EXT4-fs (sdb1): 17 orphan inodes deleted
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
udevd[356]: starting version 173
lp: driver loaded but no devices found
Adding 19800076k swap on /dev/sdb5. Priority:-1 extents:1 across:19800076k
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
it87: Found IT8718F chip at 0x290, revision 5
it87: VID is disabled (pins used for GPIO)
it87: Beeping is supported
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
type=1400 audit(1334193742.563:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=492 comm="apparmor_parser"
type=1400 audit(1334193742.563:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=492 comm="apparmor_parser"
type=1400 audit(1334193742.563:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
type=1400 audit(1334193743.027:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=982 comm="apparmor_parser"
type=1400 audit(1334193743.031:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=983 comm="apparmor_parser"
type=1400 audit(1334193743.031:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser"
type=1400 audit(1334193743.031:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
type=1400 audit(1334193743.031:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=981 comm="apparmor_parser"
type=1400 audit(1334193743.031:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=987 comm="apparmor_parser"
type=1400 audit(1334193743.031:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=986 comm="apparmor_parser"
init: udev-fallback-graphics main process (1012) terminated with status 1
init: failsafe main process (934) killed by TERM signal
init: apport pre-start process (1078) terminated with status 1
init: apport post-stop process (1147) terminated with status 1
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
init: gdm main process (1142) killed by TERM signal
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
r8169 0000:04:00.0: eth0: link down
r8169 0000:04:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ondemand governor failed, too long transition latency of HW, fallback to performance governor
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ADDRCONF(NETDEV_UP): virbr0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:04:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: plymouth-stop pre-start process (2199) terminated with status 1
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
eth0: no IPv6 routers present
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 7:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sda] Synchronizing SCSI cache
sd 6:0:0:0: [sda] Stopping disk
parport_pc 00:09: disabled
serial 00:08: disabled
serial 00:08: wake-up capability disabled by ACPI
pata_jmicron 0000:03:00.1: PCI INT B disabled
ata_piix 0000:00:1f.5: PCI INT B disabled
ata_piix 0000:00:1f.2: PCI INT B disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
ehci_hcd 0000:00:1a.7: PCI INT C disabled
uhci_hcd 0000:00:1a.2: PCI INT C disabled
uhci_hcd 0000:00:1a.0: PCI INT A disabled
uhci_hcd 0000:00:1a.1: PCI INT B disabled
sd 7:0:0:0: [sdb] Stopping disk
ehci_hcd 0000:00:1d.7: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A disabled
PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.975 msecs
PM: suspend of drv:sd dev:6:0:0:0 complete after 414.286 msecs
PM: suspend of drv:scsi dev:target6:0:0 complete after 414.243 msecs
PM: suspend of drv:scsi dev:host6 complete after 414.138 msecs
PM: suspend of drv:sd dev:7:0:0:0 complete after 639.508 msecs
PM: suspend of drv:scsi dev:target7:0:0 complete after 639.502 msecs
PM: suspend of drv:scsi dev:host7 complete after 639.334 msecs
ahci 0000:03:00.0: PCI INT A disabled
PM: suspend of drv:ahci dev:0000:03:00.0 complete after 646.304 msecs
PM: suspend of drv:pcieport dev:0000:00:1c.3 complete after 640.002 msecs
PM: suspend of drv: dev:pci0000:00 complete after 639.959 msecs
PM: suspend of devices complete after 655.617 msecs
PM: suspend devices took 0.656 seconds
r8169 0000:04:00.0: PME# enabled
pcieport 0000:00:1c.4: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 48.064 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x3
smpboot cpu 1: start_ip = 9a000
Switched to NOHz mode on CPU #1
CPU1 is up
Booting Node 0 Processor 2 APIC 0x1
smpboot cpu 2: start_ip = 9a000
Switched to NOHz mode on CPU #2
CPU2 is up
Booting Node 0 Processor 3 APIC 0x2
smpboot cpu 3: start_ip = 9a000
Switched to NOHz mode on CPU #3
CPU3 is up
ACPI: Waking up from system sleep state S3
HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfdff8004)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20001010, writing 0x1010)
ata_piix 0000:00:1f.2: restoring config space at offset 0x8 (was 0xf001, writing 0xf901)
ata_piix 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2b00001, writing 0x2b00005)
nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xef01)
nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf8000004)
nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfa000000)
nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
ahci 0000:03:00.0: restoring config space at offset 0x8 (was 0xdb01, writing 0x0)
ahci 0000:03:00.0: restoring config space at offset 0x7 (was 0xdc01, writing 0x0)
ahci 0000:03:00.0: restoring config space at offset 0x6 (was 0xdd01, writing 0x0)
ahci 0000:03:00.0: restoring config space at offset 0x5 (was 0xde01, writing 0x0)
ahci 0000:03:00.0: restoring config space at offset 0x4 (was 0xdf01, writing 0x0)
ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x800001)
ahci 0000:03:00.0: restoring config space at offset 0x2 (was 0x1018502, writing 0x1060102)
pata_jmicron 0000:03:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xdb01)
pata_jmicron 0000:03:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xdc01)
pata_jmicron 0000:03:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xdd01)
pata_jmicron 0000:03:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xde01)
pata_jmicron 0000:03:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xdf01)
pata_jmicron 0000:03:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100005)
r8169 0000:04:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
r8169 0000:04:00.0: restoring config space at offset 0xb (was 0x816810ec, writing 0xe0001458)
r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfdee000c)
r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfdeff00c)
r8169 0000:04:00.0: restoring config space at offset 0x4 (was 0xfc01, writing 0xce01)
r8169 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x1)
r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
PM: early resume of devices complete after 1.273 msecs
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.2: setting latency timer to 64
ehci_hcd 0000:00:1d.7: setting latency timer to 64
usb usb8: root hub lost power or was reset
pci 0000:00:1e.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.4: wake-up capability disabled by ACPI
r8169 0000:04:00.0: PME# disabled
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: setting latency timer to 64
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: setting latency timer to 64
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: setting latency timer to 64
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:03:00.1: setting latency timer to 64
sd 6:0:0:0: [sda] Starting disk
sd 7:0:0:0: [sdb] Starting disk
serial 00:08: activated
parport_pc 00:09: activated
PM: resume of drv:hub dev:3-0:1.0 complete after 118.987 msecs
PM: resume of drv: dev:ep_00 complete after 118.942 msecs
PM: resume of drv: dev:ep_81 complete after 118.978 msecs
PM: resume of drv:hub dev:5-0:1.0 complete after 118.733 msecs
PM: resume of drv: dev:ep_00 complete after 118.647 msecs
PM: resume of drv: dev:ep_81 complete after 118.713 msecs
PM: resume of drv:hub dev:6-0:1.0 complete after 122.523 msecs
PM: resume of drv: dev:ep_81 complete after 122.482 msecs
PM: resume of drv: dev:ep_00 complete after 122.442 msecs
PM: resume of drv:hub dev:7-0:1.0 complete after 122.364 msecs
PM: resume of drv:hub dev:8-0:1.0 complete after 122.177 msecs
PM: resume of drv: dev:ep_00 complete after 122.273 msecs
PM: resume of drv: dev:ep_81 complete after 122.327 msecs
PM: resume of drv: dev:ep_81 complete after 122.139 msecs
PM: resume of drv: dev:ep_00 complete after 122.099 msecs
PM: resume of drv:hub dev:4-0:1.0 complete after 222.854 msecs
PM: resume of drv: dev:ep_00 complete after 222.795 msecs
PM: resume of drv: dev:ep_81 complete after 222.839 msecs
PM: resume of drv:nvidia dev:0000:01:00.0 complete after 332.364 msecs
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
PM: resume of drv:HDA Intel dev:0000:00:1b.0 complete after 348.869 msecs
usb 4-1: reset low speed USB device number 2 using uhci_hcd
ata2.00: SATA link down (SStatus 4 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
PM: resume of drv:usbhid dev:4-1:1.0 complete after 794.680 msecs
PM: resume of drv:usbhid dev:4-1:1.1 complete after 794.624 msecs
PM: resume of drv: dev:ep_00 complete after 794.574 msecs
PM: resume of drv: dev:ep_81 complete after 794.665 msecs
PM: resume of drv: dev:ep_82 complete after 794.615 msecs
ata1.00: SATA link down (SStatus 4 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
ata1.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
ata1.01: configured for UDMA/100
floppy driver state
-------------------
now=4295397964 last interrupt=4294892713 diff=505251 last called handler=reset_interrupt
timeout_message=lock fdc
last output bytes:
8 90 4294892708
8 90 4294892708
8 90 4294892708
8 80 4294892712
8 90 4294892712
8 90 4294892712
8 80 4294892712
e 80 4294892712
13 90 4294892712
0 90 4294892712
1a 90 4294892712
0 90 4294892712
12 90 4294892712
0 90 4294892712
14 90 4294892712
18 90 4294892712
8 80 4294892713
8 80 4294892713
8 80 4294892713
8 80 4294892713
last result at 4294892713
last redo_fd_request at 4294892713
status=0
fdc_busy=1
do_floppy=reset_interrupt
cont=ffffffffa003ef20
current_req= (null)
command_status=-1
floppy0: floppy timeout called
PM: resume of drv:floppy dev:floppy.0 complete after 3001.454 msecs
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: configured for UDMA/133
PM: resume of drv:sd dev:7:0:0:0 complete after 7146.110 msecs
PM: resume of drv:scsi_device dev:7:0:0:0 complete after 7146.091 msecs
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: configured for UDMA/133
PM: resume of drv:sd dev:6:0:0:0 complete after 7200.296 msecs
PM: resume of drv:scsi_disk dev:6:0:0:0 complete after 4190.861 msecs
PM: resume of drv:scsi_device dev:6:0:0:0 complete after 7200.397 msecs
PM: resume of devices complete after 7202.645 msecs
PM: resume devices took 7.200 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
r8169 0000:04:00.0: eth0: link down
r8169 0000:04:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present